Fig. 43: Installing SSTs To Crankshaft Pulley
Courtesy of MAZDA MOTORS CORP.
1. Tighten to
96-104 N.m {9.8-10.6 kgf.m, 70.9-76.7 ft.lbf}
2. Tighten
87°- 93°
6. Remove the
M6 x 1.0 bolt.
7. Remove the
SST
from the camshaft.
8. Remove the
SST
from the cylinder block lower blind plug.
9. Remove the
SST
from the crankshaft pulley.
10. Rotate the crankshaft clockwise two turns until the TDC position.
If not aligned, loosen the crankshaft pulley lock bolt and repeat from Step 1.
11. Install the cylinder block lower blind plug.
Tightening torque:
18-22 N.m {1.9-2.2 kgf.m, 13.3-16.2 ft.lbf}
2007 Mazda MX-5 Miata Sport
2007 ENGINE Mechanical - MX-5
Microsoft
Thursday, July 09, 2009 3:21:51 PM
Page 48
© 2005 Mitchell Repair Information Company, LLC.
