M-MDS
CARD KEY PROGRAMMING
STEERING LOCK UNIT
PROGRAMMING
5
Replacing the
instrument cluster.
New instrument
cluster
Card key
Programming
keys (two or
more)
M-MDS
Carry out the following procedure using the
M-MDS, then go to
NO.5 RESETTING
PROCEDURE FOR THE
IMMOBILIZER SYSTEM WHEN
REPLACING THE RELATED PARTS
(PCM, KEYLESS CONTROL
MODULE, INSTRUMENT CLUSTER,
OR STEERING LOCK UNIT
)
Ignition Key Code Erase
Parameter Reset
-
Replacing the coil
antenna.
New coil antenna
Immobilizer system resetting is not
necessary.
CAUTION:
The following conditions may cause poor signal communication
between the key and vehicle, resulting in the engine not starting or a
key registration error. Do not perform any work under the following
conditions:
Placing the following items close to the key grip or contacting
it.
Spare keys
Keys for other vehicles equipped with an immobilizer system
Any metallic object
Any electronic device, or any credit or other card with magnetic
strips
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed:
M-MDS
Personal computer
Devices that can send/receive the radio waves
NOTE:
The "valid key" used in this manual indicates the key that can start the
engine.
If the key adding, programming, clearing, and immobilizer system
construction parts replacement are performed, verify that the all keys can
start the engine within 5 s after the procedure.
When verifying that the engine starts, wait at least 5 s or more before
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
