Fig. 120: Installation View Of Black-Out Film (Front)
Courtesy of MAZDA MOTORS CORP.
REAR
1. Remove any grease or dirt from the affixing surface of the middle roof panel.
2. Peel off the tape backing from the upper area
50-100 mm,
and adhere the black-out film to the
positioning point shown in the figure.
Clearance
a: 0-3.0 mm {0-0.118 in}
3. Peel off the tape backing and adhere the black-out film surface.
4. Peel off the transparent protective film on the black-out film.
5. Apply pressure to the black-out film in the order of side and back side.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:32:13 PM
Page 83
© 2005 Mitchell Repair Information Company, LLC.
