1. Inspect the fuel hose and fuel pipe sealing surface for damage and deformation.
If there is any malfunction, replace it with a new one.
2. Apply a small amount of clean engine oil to the sealing surface of the fuel pipe.
3. Reconnect the fuel hose straight to the fuel pipe until a click is heard.
4. Lightly pull and push the quick release connector a few times by hand, and then verify that it can move
2.0-3.0 mm {0.08-0.12 in}
and is connected securely.
5. Complete the "AFTER SERVICE PRECAUTION". (See
AFTER SERVICE PRECAUTION [LF]
.)
TYPE B INSTALLATION
Fig. 35: Identifying Checker Tab
Courtesy of MAZDA MOTORS CORP.
NOTE:
If the quick release connector does not move at all, disconnect it,
verify that the O-ring is not damaged or has not slipped, and then
reconnect the quick release connector.
CAUTION:
Always replace the retainer with a new one when using SST 49 E042
001, otherwise, fuel leakage could result.
2007 Mazda MX-5 Miata Sport
2007 ENGINE Fuel System - MX-5 Miata
Microsoft
Thursday, July 09, 2009 2:37:12 PM
Page 39
© 2005 Mitchell Repair Information Company, LLC.
