When the keyless control module is replaced
Have one or more card keys to be programmed after the replacement.
Have two or more keys to be programmed after the replacement.
When the keyless control module is not to be replaced
Have one or more card keys to be programmed.
Have two or more keys to be programmed after the replacement.
Procedure
Fig. 26: Identifying Key For Registration
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See
M-MDS CONNECTING PROCEDURE
.)
3. Using key 1, turn the ignition switch to the ON position.
4. Verify that the keyless warning light illuminates for
approx. 3 s
and then goes out.
5. Select "BODY/SECURITY/PATS functions" from the M-MDS screen menu.
6. Select "Ignition Key Code Erase" from the M-MDS screen menu and perform the procedure according to
the M-MDS screen.
7. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE[ADVANCED KEYLESS SYSTEM]
.
CAUTION:
Perform the procedures in the following order: "Ignition Key Code
Erase", "Program Additional card key", "Steering lock unit
programming", and "Program additional ignition key". If there is a
failure in the programming, the engine may not be started.
When replacing only the PCM, start from Step 2. Key 1 in the
procedure can be any valid key.
Perform the "card key programming procedure" in Step 11 only when
the keyless control module is replaced.
Perform the "steering lock unit programming procedure" in Step 12
only when either the keyless control module or steering lock unit is
replaced.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
