![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387122.webp)
Page 106
REPAIR INSTRUCTIONS
3. Remove the two top retaining nuts and
isolating washers that secure the EECU to
the EECU mounting bracket (Figure 85).
Then, remove the two bottom retaining nuts
and isolating washers that secure the EECU
to the of the air inlet manifold.
4. Carefully remove the EECU from the inlet
manifold. The bracket can remain attached
to the inlet manifold providing the manifold is
not being replaced.
85
Figure 85 — EECU Removal (Left-Side Mounted Unit)
1. Air Inlet Manifold
2. Coolant Manifold
3. Lower Mounting Bolts
(Two)
4. EECU
5. Upper Mounting Bolts
(Two)
6. Mounting Stud
5_106_00.bk Page 106 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs