![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387297.webp)
REPAIR INSTRUCTIONS
Page 281
Alternator Installation
[271 CB]
Refer to Figure 310.
1. Install the alternator plate and mounting
hardware.
2. Position the alternator on the plate and
install the capscrews (2), washers and
mounting nuts.
3. Connect the electrical wires as tagged
during disassembly.
4. Install the poly-V drive belt (1).
5. Adjust the drive belt tension to specification
as described under Belt Drive System
procedures in the MAINTENANCE section.
310
Figure 310 — Alternator Installation
Removing Engine from Engine
Stand
[200 EA]
1. Attach a suitable lifting device to lifting points
on the engine.
2. Position and attach an engine hoist to the
lifting device; operate the hoist to place
tension on the lifting device.
3. With the lifting device now supporting the
engine weight, remove the mounting
capscrews from the engine stand.
4. Using the lifting device, place the engine in a
suitable support rack or install the engine in
the vehicle (see Engine Installation in the
REPAIR INSTRUCTIONS section).
1. Adjusting Capscrew
2. Mounting Capscrews
3. Alternator
5_106_00.bk Page 281 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs