![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387293.webp)
REPAIR INSTRUCTIONS
Page 277
5. Position the thermostat (7) in the housing (5)
with the jiggle pin or caged ball up.
6. Install a gasket (8) on the housing mounting
surface.
7. Position the housing assembly on the
coolant manifold (9) mounting surface.
8. Secure in position with two lower mounting
capscrews (13).
305
Figure 305 — Thermostat Housing Installation
1. Capscrew
2. Coolant Conditioner Adapter Assembly (if Equipped)
3. Check Valve (if Equipped)
4. O-Ring
5. Thermostat Housing
6. Thermostat Seal
7. Thermostat
8. Gasket
9. Coolant Manifold
10. Clamps
11. Oil Cooler Supply (Bypass) Tube
12. Coupling (Hose)
13. Capscrew
14. Coolant Conditioner Filter Element (if Equipped)
5_106_00.bk Page 277 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs