![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387019.webp)
INTRODUCTION
Page 3
Service Procedures and Tool Usage
Anyone using a service procedure or tool not recommended in this manual must first satisfy himself
thoroughly that neither his safety nor vehicle safety will be jeopardized by the service method he selects.
Individuals deviating in any manner from the instructions provided assume all risks of consequential
personal injury or damage to equipment involved.
Also note that particular service procedures may require the use of a special tool(s) designed for a
specific purpose. These special tools must be used in the manner described, whenever specified in the
instructions.
1. Before starting a vehicle, always be seated in the driver’s seat, place the
transmission in neutral, be sure that parking brakes are set, and
disengage the clutch.
2. Before working on a vehicle, place the transmission in neutral, set the
parking brakes, and block the wheels.
3. Before towing the vehicle, place the transmission in neutral and lift the
rear wheels off the ground, or disconnect the driveline to avoid damage to
the transmission during towing.
Engine-driven components such as Power Take-Off (PTO) units, fans and fan
belts, driveshafts and other related rotating assemblies, can be very
dangerous. Do not work on or service engine-driven components unless the
engine is shut down. Always keep body parts and loose clothing out of range
of these powerful components to prevent serious personal injury. Be aware of
PTO engagement or nonengagement status. Always disengage the PTO when
not in use.
REMEMBER,
SAFETY . . . IS NO ACCIDENT!
5_106_00.bk Page 3 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs