![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387291.webp)
REPAIR INSTRUCTIONS
Page 275
3. Place couple (2) in position on the couple
mounting flange. Place two clamps (3) over
the couple.
4. Insert the rear manifold section (4) in the
couple.
5. Place a gasket between the mounting
surfaces of the rear manifold section and the
cylinder head.
6. Lubricate threads of the mounting
capscrews (5) and secure the rear manifold
section with the mounting capscrews.
7. Tighten all mounting capscrews to the
specified torque, 25 lb-ft (34 N•m), using
torque wrench J 24406, or equivalent.
8. Ensure that the couple is properly installed
and secure it in position with the clamps.
Tighten the clamps to the specified torque,
38 lb-in (4.3 N•m).
303
Figure 303 — Coolant Manifold and Air Inlet Manifold Installation (Shown with Two-Piece Air Inlet Manifold)
1. Coolant Manifold, Front Section
2. Couple
3. Clamp
4. Coolant Manifold, Rear Section
5. Capscrew
6. Air Inlet Manifold, Rear Section
7. Inlet Air Temperature Sensor (Sending Unit)
8. Air Inlet Manifold, Front Section
9. Capscrew, 12-Point
5_106_00.bk Page 275 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs