Page 280
REPAIR INSTRUCTIONS
Engine ECU Installation
[230 EA]
Left-Side Mounted Assembly
1. Position the EECU and bracket assembly on
the air inlet manifold and install the isolating
washers and three mounting capscrews
(Figure 308). Tighten the capscrews to
specification, 15 lb-ft (20 N•m).
2. Connect the wiring harness to the EECU.
308
Figure 308 — Engine ECU Installation (Left-Side
Mounted Unit)
Oil Cooler-to-Water Pump Inlet Line
Installation
If the engine is equipped with the plate-type oil
cooler, install the oil cooler-to-water pump inlet
line (Figure 309) as follows:
1. Place the inlet line in position on the engine
and loosely install the capscrews attaching
the line to the water pump.
2. Install the flexible hose coupling and two
clamps between the inlet line and the
coolant manifold.
3. Tighten the two capscrews securing the inlet
line to the water pump to specification,
60 lb-ft (81 N•m).
309
Figure 309 — Oil Cooler-to-Water Pump Inlet Line
Installation
1. Air Inlet Manifold
2. Coolant Manifold
3. Lower Mounting Bolts
(Two)
4. EECU
5. Upper Mounting Bolts
(Two)
6. Mounting Stud
1. Water Pump
2. Thermostat By-Pass
Hose Connection
3. Water Pump Inlet Pipe
5_106_00.bk Page 280 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs