background image

(1) Charging the battery (Approx. 3.5 hours to full charge)
     
a.   Connect the adaptor DC plug in Power Connector on the side of the  controller.
b.   In order to activate charge of battery, the volume knob must be kept “OFF”condition.
c.   Connect the AC power adaptor to outlet (wall socket).
d.   When the lamp changes red to green, the charge is completed.
e.   Disconnect  AC Adaptor from Controller after charging is completed.
         ( Lamp color : Red --> Green )   

1)  Power on/off & Speed Control Knob
2)  Forward / Reverse Selector
4)  Handpiece Connector
5)  On / Charge lamp
6)  Battery Charger Connector

PORTABLE MICRO MOTOR USER'S MANUAL

Features

* 30,000 RPM
* Rechargeable
* Up to 8 hours battery life
* 3.5 hours battery full charge
* Variable speed control
* Light weight handpiece
* Chuck Locking

* Easy bit change
* Uses standard 
   2.35mm (3/32") bits
* High torque
* Quiet operation
* No vibration
* Rechargeable battery, 
   clips to belt 

Product Components & Part Name

   Setting & Operation

● Warning for Low Voltage Battery : We recommend to charge the 

     battery immediately when the red light is blinking.
     (It shows that the battery remains 20%)

● To protect the battery the battery is not charging 

     while user use the handpiece with connection DC Adaptor.

(2) Handpiece Operation

  

   a.

 Connect Handpiece Cord to the jack marked as "MOTOR"

         (DC Motor Connector)in the front of the controller.
   

  b.

 Turn the Speed Control Knob to start the handpiece. Turn it until click

         sound to power off and to stop the handpiece.
    

 c. 

Turn the Forward/Reverse Selector to "FWD" to run the 

         motor in the forward direction, or to "REV" to run it in the
         Reverse direction.
     

d. 

Handpiece Motor speed can be varied between  0 and 30,000 rpm

         by the Speed Control Knob

(3) Insertion and removal of bits

   Turn the handle in the counter-clock direction until the click sound to 

   open the chuck.

   The chuck is opened and the bit is removed. 
   Turn the handle in clock direction until the end and the chuck is closed 

   and the bit is locked. 

adaptor

Input  : 100-240V~ 47-63Hz 0.9-0.34A
Output : 30V       1A max

Handpiece (POHP)

Rotation (r.p.m) : 0~30,000rpm

Dimensions : φ19 x L135(mm)

Weight  : 172g

Contorller 

Input     : 30V        1A
Output : 24V        1A
Size   : 65(W) x 129(D) x 36(H)
Weight : 388g

Thank you for your purchase.

Maintain and repair properly in order to have trouble-free performance for many years
Please keep this manual for future reference.
Saeshin is not responsible for the accident causing by not following the instructions.

The appearance and specification may be changed without any further notices. 

Users are responsible for the operation and maintenance.
By informing the product, model, faulty status, the kind consulting 
and quick service will be provided. 

Specifications

1. Do not work in a dangerous place. Do not use the control box in a humid place, 
    use in a proper place. 
2. Environment setup

    Temperature : +10℃~+40℃  Humidity : 30%~75%  Air Pressure: 700~1060hPa

3. Our handpiece and foot pedal should be only used for our control unit.
4. Bit

  - Dimensions of the Bit: 2.35mm(ISO7785-2  TYPE2)

  - Minimum fitting length of Bit: 10mm
  - When locked in the chuck, the maximum projection length of Bit should be 
     less than 35mm.
  - Use the bit that conforms to the ISO standard. Avoid using a rusty or bent bit 
     that cause excessive wear of bearings.
  - Keep safe speed and precautions recommended by bit manufacturer.
[the allowable RPM according to the bar diameter]
 Please keep the RPM according to below diagram against accident.
5. Check for any troubles, including vibration of bit, at low speed, 
    and then try high speed. 
6. Operate the speed control dial in control box softly.

7. Turn off the power. When the handpiece

     absolutely stops, screw handle in order to 
     change the bit. 
8. Be careful not to drop the handpiece as 
     it may be damaged or broken.

  - This may cause bearings damaged.  

  -  In case that it is dropped, check if the bit is
     bent or that any noisy of bearings and any excessive heat are generated 
     while carefully operating it.

CAUTION 

Caution

- This equipment and accessories are to be disposed of safely         

  after the life span of them and national regulation must be observed.

- This equipment and accessories are to be disposed according   

  to the instructions given by national regulations or ask a 
  specialized  waste service company to dispose of it.
- Follow local governing ordinances and recycling plans   
  regarding disposal or recycling of device components

  This marking shown on the product or its literature, indicates that it should 

  not be disposed with other household wastes at the end of its working life. 

  To prevent possible harm to the environment or human health from uncon-

  trolled waste disposal, please separate this from other types of wastes and 
  recycle it responsibly to promote the sustainable reuse of material resources.
   Household users should contact either the retailer where they purchased this
  product, or their local government office, for details of where and how they can 
  take this item for environmentally safe recycling. 
  

E-type motor (PEHP)

Rotation (r.p.m) : 0~30,000rpm

Dimensions : φ20 x L100(mm)

Weight  : 120g

A.

 Contorller

B. 

Handpiece - Optional 

C.

 E-type motor - Optional 

D.

 Power cord

E.

 Adaptor

F.

 Handpiece holder

G. 

Contorller holder

H.

 Bolt

I.

 Handpiece stand (option)

C

E

F

G

H

I

Reviews: