Page 122
REPAIR INSTRUCTIONS
Cylinder Head Assembly Removal
[213 EV]
Refer to Figure 106.
1. Remove fuel return tube (2) from between
the cylinder head assemblies (4) by
loosening the tube sleeve nuts from each
end.
2. Remove fuel return line (3) at the rear of the
rearward cylinder head, if not already
removed.
3. Remove cylinder head bolts (1 and 5). Refer
to cylinder head bolt torque sequence chart
under Cylinder Head Installation in Engine
Reassembly, for location of bolts, if
necessary.
Cylinder head assemblies are heavy. Lifting a
cylinder head requires the help of an
assistant or suitable lifting device. Attempting
to lift a cylinder head without assistance may
result in severe personal injury.
4. Using a suitable lifting device, remove heads
from the cylinder block.
5. Remove gaskets and six fire rings. Discard
gaskets and fire rings.
106
Figure 106 — Cylinder Heads
1. Bolt
2. Fuel Return Tube
3. Fuel Return Line
4. Cylinder Head
5. Bolt (with Bracket Mounting Capscrew Hole in Head)
5_106_00.bk Page 122 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs