![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387123.webp)
REPAIR INSTRUCTIONS
Page 107
Fuel Filter Adapter Assembly
Removal
[231 PB]
Refer to Figure 86 and Figure 87.
1. Disconnect wiring harness connector at the
fuel temperature sensor on top of the fuel
filter adapter assembly, if so equipped (1).
2. Disconnect fuel lines from fittings (2, 3 and
5) on the adapter. Tag and cap all lines.
3. Remove three capscrews (4) from the top of
the fuel filter adapter assembly.
4. Remove fuel filter adapter assembly from
the air inlet manifold (7).
5. Remove fuel supply hose stand-off bracket
from head bolt/water pump support bracket
and remove supply hose.
86
Figure 86 — Fuel Filter Adapter Assembly Removal (Current Production)
1. Secondary Filter Fitting (Out)
2. Secondary Filter Fitting (In)
3. Primary Filter Fitting (Out)
4. Coolant Manifold
5. Air Inlet Manifold
6. Mounting Bracket
7. Primary Filter Fitting (In)
8. Fuel Filter Adapter
5_106_00.bk Page 107 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs