REPAIR INSTRUCTIONS
Page 165
2. Thoroughly clean the flange area of the
crankshaft. Check for nicks or scratches and
repair any damaged areas with crocus cloth
as necessary.
156
Figure 156 — Crankshaft Wear Ring Removal
INSTALLATION
Refer to Figure 157.
On some wear rings it may be difficult to
determine the direction of the arrow on the inside
diameter. In this case, ensure proper installation
by installing the wear ring with the chamfer on the
inside diameter toward the engine. The chamfer
on the outside diameter of the wear ring must
face away from the engine.
The crankshaft wear ring is a shrink fit on the
crankshaft flange. Use wear ring installer J 38880
and universal driver handle J 8092 to install the
ring to the proper depth.
157
Figure 157 — Proper Crankshaft Wear Ring Installation
1. Position the wear ring in the spring clips of
the wear ring installer J 38880 with the arrow
pointing away from the installer tool. Refer to
Figure 158.
158
Figure 158 — Crankshaft Wear Ring Installation
5_106_00.bk Page 165 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs