![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387129.webp)
REPAIR INSTRUCTIONS
Page 113
Turbocharger Removal
[214 SD]
Refer to Figure 94.
1. Remove two capscrews (3) securing
turbocharger lubrication drain tube (4) to
turbocharger (1).
2. Remove drain tube (4) from cylinder block.
3. Loosen four turbocharger mounting nuts (5)
and remove turbocharger (1).
94
Figure 94 — Turbocharger Removal
Fuel Nozzle Inlet Tube Assembly
Removal
[222 KD]
Refer to Figure 95.
1. Remove the four retaining nuts securing the
three-section heat shield to the cylinder
block and remove shield.
2. Loosen the tube sleeve nut (1) at the unit
pump for the No. 1 cylinder. Be careful to
avoid twisting the line while loosening the
nut.
3. Loosen tube sleeve nut (2) and tube
clamping screw at the cylinder head and
remove the tube assembly. Cap the line and
fittings to prevent contaminants from
entering the system.
95
Figure 95 — Fuel Inlet Tube Assembly Removal
4. Repeat this procedure for the five remaining
cylinders.
1. Turbocharger
2. Lubrication Supply Line
3. Capscrew
4. Lubrication Drain Tube
5. Mounting Nut
1. EUP Sleeve Nut
2. Fuel Inlet Tube Clamping
Screw and Sleeve Nut
5_106_00.bk Page 113 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs