![background image](http://html1.mh-extra.com/html/mack/e-tech-sb-210-034/e-tech-sb-210-034_service-manual_3224387217.webp)
REPAIR INSTRUCTIONS
Page 201
REPLACEMENT (1/8-, 1/16-INCH PLUGS)
1. If reusing a pipe plug, the threads on the
plug and in the cylinder head must be
thoroughly cleaned and dried.
2. Apply dry pipe thread sealant to the pipe
plug and plug bore in the cylinder head.
3. Install a 1/8-inch NPT pipe plug in the fuel
passage at the top front location of the front
cylinder head. Tighten the plug to the
specified torque, 6 lb-ft (8 N•m).
4. Install a 1/16-inch NPT pipe plug in each end
of the cylinder head. Tighten the plugs to the
specification.
208
Figure 208 — Cylinder Head Pipe Plug Locations
1. 1-1/16-inch Cup Plug
2. 1/16-inch NPT Plug
3. 1/8-inch NPT Plug
4. 3/4-inch NPT Plug
5. 13/16-inch Cup Plug
5_106_00.bk Page 201 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs