Kodak SRP 30 Operator'S Manual Download

Page: 297 / 310

Operator’s Guide

7. Remove the guide grids and clean with water and a lint-free cloth to remove all

chemical deposits (crystalline sheet bridge deposits).

8. Carefully mount the guide grids.

9. Mount the bracket with the feed roller set on the rack.

10. Check the smooth movement of the rack by turning the handle. (See No. 4 in the

figure on the previous page.)

11. Push the dryer rack in the dryer cabinet and fasten it with the knurled screw.

12. Reinstall the cover. Rotate the lock 90°, and push it in and up to the locking

position.

8-44

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands