Kodak SRP 30 Operator'S Manual Download Page 211

Page: 211 / 310

Operator’s Guide

Slide Print Mode

Use Slide Print mode for printing slides. This print mode always uses Preview.

1. Insert the slide carrier.

IMPORTANT: The system performs an automatic pixel correction. Do not pull out

the slide carrier during this process.

2. Touch:

•

Print mode

•

Slide print

The top section of the carrier moves out.

3. If required, touch a different slide print configuration.

4. Touch

Change configuration if necessary to change the configuration for the

order.

6-40

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands