Kodak SRP 30 Operator'S Manual Download Page 273

Page: 273 / 310

Operator’s Guide

Opening and Closing the Wet Section Cover

WARNING:

A risk of injury is possible if the wet section cover is unlocked
unintentionally (when PUSH is pressed).

•

When opening the cover:
Check that the cover lock fully engages in vertical position.

•

When closing the cover:
Support the cover with one hand. Press the unlocking lever
(PUSH), and close the cover.

Removing the CD (Color Developer) Feed Unit

1. Fasten the splash guard (1) to the front of the paper processor to protect the area

from chemical splashes.

2. Release the tabs (2) and grasp the CD feed unit (3). Remove the unit, and put it

in the lab basin.

8-20

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands