Kodak SRP 30 Operator'S Manual Download Page 195

Page: 195 / 310

Operator’s Guide

For APS films, the system checks to see if a list already exists for the entered
film identification number (FID):

•

If not, the list is saved.

•

If a list already exists, a pop-up window offers the Overwrite and Cancel
functions.

7. To begin the printing process, insert the film strip into the film feeder, emulsion

side down. All important data for the order is shown on the screen.

If Preview is enabled, the Preview screen appears. Go to Step 8.

If Preview is disabled, the order begins to process and the status is displayed at
the bottom of the screen. Go to Step 12.

NOTE: It is not possible to switch to Reorder with Preview while an order is

processing.

6-24

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands