Kodak SRP 30 Operator'S Manual Download Page 280

Page: 280 / 310

Maintenance

Cleaning the Densitometer Calibration Plate

The densitometer is mounted in the paper outlet.

1. Remove the screw (2) and remove the front cover of the paper outlet (1).

2. Loosen the knurled screws (1) on the right and left side on the guide plate of the

densitometer unit.

3. Turn the densitometer (2) over and clean the calibration plate with water and a

lint-free cloth.

4. Clean the guide plates with water and a lint-free cloth.

5. Fasten the densitometer unit again with the knurled screws.

6. Fasten the cover of the paper outlet.

CAUTION:

Have a service technician replace any damaged calibration
plates.

KODAK PROFESSIONAL SRP 30 Laser Printer

8-27

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands