Kodak SRP 30 Operator'S Manual Download

Page: 50 / 310

Overview

desired, 0 must be entered.

Menu Bar

The main menus are always accessible, except when either a pop-up window is open
or the Help screen is open.

Menu buttons that appear gray indicate that the function is not available.

The structure of the menus is described in the next subsection, Menu Overview.

Menu Overview

Main Menus

The following main menus are available on the menu bar:

•

Print mode

•

Settings

•

Test

•

P Statistics

•

End of work

Other menus are available by pressing i and ?:

•

Status Information

•

Help

All menus and associated screens are outlined on the following pages.

KODAK PROFESSIONAL SRP 30 Laser Printer

2-31

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands