Kodak SRP 30, Operator'S Manual

Page: 32 / 310

Overview
System Startup Status
After automatic or manual startup, the equipment heats the solutions and the dryer to
nominal temperatures. During this phase, the monitor displays:
•
The progress of the heating process
•
The remaining time until the equipment is ready to operate
•
Any error messages
•
The Stop button to shut down the equipment correctly any time during the startup
process
The equipment is ready for operation after the solutions and the dryer have reached
nominal temperatures.
Readiness for Operation
User Login
After the equipment has been started and heated up, the Login screen appears,
where you enter your user name and password (four numbers). The user name is
preset if you have been defined as the first user who must enter a password.
After you enter the user name (if required) and password, the Start screen appears.
The Start screen appears immediately after warm-up if the first user is logged in
automatically (the system does not check for a password). The Start screen also
appears after a new user has logged in.
KODAK PROFESSIONAL SRP 30 Laser Printer 2-13