Kodak SRP 30, Operator'S Manual

Page: 144 / 310

Settings
Single Configurations
Film Mask: 135, 120, 110
This screen results from selecting New or Edit from the Order configurations – List
screen (Page 4-67).
1. Select the appropriate sub-configurations or set to Off.
2. Touch PpF and select the number of prints per frame (preset = 1). To create a
value not listed, use the New entry for PpF option.
3. Touch Border and select a border from 4–60 mm or set to 0 for borderless
prints. To create a value not listed, use the New entry for border option.
4. Touch:
•
FF paper config. and select a paper configuration for Full Frame
•
FF cut length and select a cut length for Full Frame
•
P paper config. and select a paper configuration for Panorama
•
P cut length and select a cut length for Panorama
5. Touch Save as if you are creating a new configuration, and enter a name.
Touch Save to save changes to an existing configuration.
Touch Cancel to return to the previous screen without saving.
For an explanation of the Standard button, see Defining a Standard
Configuration on Page 4-79. NOTE:
KODAK PROFESSIONAL SRP 30 Laser Printer 4-69