Kodak SRP 30 Operator'S Manual Download

Page: 284 / 310

Maintenance

CAUTION:

When cleaning the very thin and highly fragile glasses of the
exposure filters (1), support them carefully from below so that
they do not break.

To avoid fingerprints, do NOT touch the filter glasses with your
bare hands.

7. Remove the dust with compressed air and a spray tube.

8. If the filters are very dirty, clean them carefully with an optical cloth or with optic

pads.

After cleaning the filters:

9. Reinstall

the

filter cover.

10. Release the black lever holding the lamp opening mechanism.

11. Attach the lamp house cover to the metal bracket and close the cover.

12. Start up the printer (press the ON key on the scanner).

KODAK PROFESSIONAL SRP 30 Laser Printer

8-31

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands