Kodak SRP 30 Operator'S Manual Download Page 252

Page: 252 / 310

Correcting System Conditions

Paper Jams between the Lane Distributor and Sheet Transfer

1. Open the front cabinet door.

2. Pull the red locking pin (1) and remove the sheet transfer cover (2).

3. Hold the sheet transfer by the handle (3) and lift it out of the printer.

4. Remove the paper.

5. Check that all belts are positioned correctly on the rollers.

6. Mount the sheet transfer cover by holding the latch in the open position and

lowering the cover.

CAUTION:

If the paper is damaged (torn or squeezed) when it is pulled out,
mechanical damage cannot be ruled out.

KODAK PROFESSIONAL SRP 30 Laser Printer

7-19

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands