Kodak SRP 30 Operator'S Manual Download Page 70

Page: 70 / 310

Chemicals

Preparation of Chemicals

WARNING:

A risk of injury is possible if the cover of the wet section is
unlocked (when PUSH is pressed unintentionally).

•

When opening the cover:
Check that the cover lock fully engages in the vertical
position.

•

When closing the cover:
Support the cover with one hand. Press the unlocking lever
(PUSH), and close the cover.

A water temperature of approximately 30°C (86°F) is recommended for the
preparation of the individual tank fillings.

The chemicals are prepared directly in the tanks.

KODAK PROFESSIONAL SRP 30 Laser Printer

3-3

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands