Kodak SRP 30, Operator'S Manual

Page: 150 / 310

Settings
Package Configurations
Package configurations let you assemble any combination of single order
configurations.
NOTE: If you use a configuration with more than two paper widths for printing, you
may receive a system request to change the paper magazine.
1. From the Order configurations - List screen (Page 4-67), touch New, or select
an existing package configuration (designated by “P”) and touch Edit.
2. Select a Film mask and Film type.
3. Touch Config. type and select Package.
NOTE:
NOTE:
NOTE:
You can only change Config. type if you selected New from the
Order configurations - List screen.
4. Select the appropriate sub-configurations or set Off.
For Index print, Back print, and Autosave, the settings you make here are
applied. The settings in the single configurations on which they are based are
ignored.
5. From the Select configuration list, use
→
to add the desired order
configurations to the package. (Remove any configurations from the package
with
←
.)
Order configurations only appear in the Select configuration list:
•
If they match the selected film mask
•
If they are not package configurations themselves (a package cannot be
part of another package)
•
If the PpF is not zero
6. Touch Change PpF and select the number of prints per frame (preset = 1). To
create a value not listed, use the New entry for PpF option.
7. Touch Save as if you are creating a new configuration, and enter a name.
Touch Save to save changes to an existing configuration.
Touch Cancel to return to the previous screen without saving.
KODAK PROFESSIONAL SRP 30 Laser Printer 4-75