Kodak SRP 30 Operator'S Manual Download

Page: 250 / 310

Correcting System Conditions

4. Release the two locking levers (1) and open the bottom belt assembly (2).

5. Remove the paper from the print roller (3).

6. Check that all belts of the lower belt assembly and the print drum are positioned

correctly on the rollers.

7. Close the bottom belt assembly.

Paper Jams between the Transport Unit and the Lane
Distributor

1. Open the right-hand printer door.

2. Loosen the red locking screw (1) and pull the lane distributor out on the

telescopic rails.

3. Turn the hand wheel (2) at least 10 turns to advance the sheet into the lane

distributor.

KODAK PROFESSIONAL SRP 30 Laser Printer

7-17

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands