Kodak SRP 30, Operator'S Manual

Page: 75 / 310

Operator’s Guide
4. Put the EKTACOLOR Processing Cartridge in the docking station with the sticker
facing up.
The preparation of the replenishers starts as soon as the docking station is
closed. During this procedure, the door is locked mechanically and the LED on
the left side of the docking station illuminates steadily.
IMPORTANT: To reduce oxidation, a cartridge should always be in the docking
station. After the LED is turned off, the cartridge can be removed and
replaced by a full one. Alternatively, an empty cartridge can remain
in the docking station until you get a message to insert a new
cartridge.
The replenishers are mixed automatically by the integrated electrically driven mixers.
One preparation is sufficient for about 75 m
2
(807 ft²) of color negative paper,
equivalent to approximately 1400 8 x 10-in. (20 x 25-cm) prints.
Other Operations to Perform Prior to Production
1. Set the reference values. (See Paper Processor Settings in Chapter 4.)
2. Test the chemicals. (See Testing the Paper Processor in Chapter 5.)
3. Adjust the equipment to the operators’ needs (such as national settings) and to
the production requirements (such as configurations and price categories).
(See Settings, Chapter 4.)
4. Calibrate the equipment. (See Tests, Chapter 5.)
3-8 KODAK PROFESSIONAL SRP 30 Laser Printer