Kodak SRP 30 Operator'S Manual Download

Page: 239 / 310

Operator’s Guide

Reset Using the ON Key

The advantages of using the ON key to initiate a reset are:

•

The laser does not need to be started.

•

No new PIKO is required.

ON key

2 Timer

lamp

Film stop key

Press the ON key to initiate a reset when:

•

The whole system must be initialized (for example, when using the Stop button has
no effect).

•

The selected actions are not executed (the system is “locked up”)

•

An undefined operating status has occurred.

IMPORTANT: Do not pull out the film mask during a reset.

The system automatically saves the database prior to a reset. After the reset, the
system starts up again and loads the last valid backup.

You do not lose data. The system is in the same status it was before the ON key was
pressed.

7-6

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands