Kodak SRP 30 Operator'S Manual Download

Page: 253 / 310

Operator’s Guide

Paper Jams in the Paper Processor

WARNING:

Wear protective gloves and goggles during all operations when
there is the potential to come in contact with chemicals.

Do the following procedures from Chapter 8, Maintenance. Check for and remove
any jammed paper during each procedure.

•

Opening and Closing the Wet Section Cover

•

Removing the CD (Color Developer) Feed Unit

•

Removing the Tank Crossovers

•

Removing the Squeegee Unit and V Wiper

•

Cleaning the Processing Racks (do only the steps related to removing the SB1–
SB4, BX, and CD racks)

7-20

KODAK PROFESSIONAL SRP 30 Laser Printer

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands