Kodak SRP 30 Operator'S Manual Download

Page: 282 / 310

Maintenance

Monthly Maintenance

Cleaning the Exposure Filters

Depending on the ambient conditions (dust, fumes etc.), you might have to clean the
exposure filters.

Necessary tools:

•

Compressed air

•

Spray tube

•

Optical cloth or pads

WARNING:

Doing this procedure with the printer powered on could expose
you to dangerous voltage.

The lamp and the lamp house get very hot.

1. Shut down the printer (touch End of work / Shutdown).

2. Wait a few minutes to let the lamp cool.

3. Push the lamp house cover (1) slightly to the front until it snaps open.

KODAK PROFESSIONAL SRP 30 Laser Printer

8-29

Summary of Contents for SRP 30






















































































































































































































































































































Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands

Kodak SRP 30, Operator'S Manual

Search results

Summary of Contents for SRP 30

Reviews:

Related manuals for SRP 30

Brands by name

Popular brands