Kodak SRP 30, Operator'S Manual

Page: 277 / 310

Operator’s Guide
Checking the Solution Levels
Purpose:
To compensate for evaporation (also required with the automatic evaporation
compensation).
Do this procedure once a week before starting production. The best time is when you
do the weekly cleaning of the CD feed unit, tank crossovers, and squeegee unit. (See
Page 8-19.)
1. With the CD feed unit, tank crossovers, and squeegee unit removed, check the
solution levels in the paper processor. The solution levels should just cover the
tops of the processing racks.
2. Replenish with water if necessary.
If the level drops considerably and consistently:
1. Adjust the settings of the water replenishment to the required level. (See Setting
the Replenishment Rates in Chapter 4.)
2. Replace defective level switches (service technician).
3. Search for leaks (service technician).
WARNING:
The risk of fire exists if the level switches become defective.
Have defective level switches replaced immediately. Do NOT
attempt to repair them.
8-24 KODAK PROFESSIONAL SRP 30 Laser Printer