Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1365 / 1502

monitor atm vp
Syntax monitor atm vp atm interfaceSpecifier vpi [ atm interfaceSpecifier vpi ]*
[ load-interval seconds ] [ display-time-of-day ]
Release Information Command introduced in JunosE Release 7.1.0.
Description Displays bit rate and packet rate statistics over a specified time interval for one or more
ATM virtual paths (VPs). There is no
no version.
Options
•
interfaceSpecifier— ATM interface specifier; see Interface Types and Specifiers on
page 5
•
vpi —Virtual path identifier of the PVC. The numeric range of the VPI depends on the
line module capabilities and current configuration.
•
seconds —Number of seconds in the range 5–300 that specifies the time interval at
which the router calculates bit rates and packet rates for the specified VP; default
value is 5 seconds
•
display-time-of-day—Sets time at which the router calculates the bit rate and packet
rate statistics for the current interval
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Privileged Exec, User Exec
1321 Copyright © 2010, Juniper Networks, Inc.
Chapter 13: M Commands