Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 201 / 1502

atm atm1483 subscriber
Syntax atm atm1483 subscriber upperInterfaceType { user | user-prefix } userName
domain domainName [ { password | password-prefix }
password ] [ no-authenticate ]
no atm atm1483 subscriber upperInterfaceType
Release Information Command introduced before JunosE Release 7.1.0.
Description Configures a local subscriber (when one cannot be obtained externally, as in PPP) for a
dynamic upper interface encapsulation type configured over a dynamic ATM 1483
subinterface. A subscriber supports authentication and configuration from the RADIUS
server. The
no version removes the subscriber.
Options upperInterfaceType —One of the following dynamic encapsulation types:
•
•
bridgedEthernet
•
ip
•
user—Employs the username as specified
•
user-prefix—Appends the interface physical location to the username
•
userName —RADIUS username
•
domainName —Domain name
•
password—Employs the password as specified
•
password-prefix—Appends the interface physical location to the password
•
password —RADIUS password
•
no-authenticate—Disables authentication
Mode Profile Configuration
157 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: A Commands