manualshive.com logo in svg

Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

The "Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010" is a comprehensive Command Reference Manual for managing your Juniper network devices. This manual provides detailed instructions on utilizing the XML Management Protocol. Download this free manual from manualshive.com to optimize your network management capabilities.

Share
Download
background image

atm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
atm aal5 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
atm aal5 shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
atm aal5 snmp trap link-status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
atm atm1483 advisory-rx-speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
atm atm1483 auto-configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
atm atm1483 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
atm atm1483 export-subinterface-description . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
atm atm1483 mtu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
atm atm1483 profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
atm atm1483 shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
atm atm1483 snmp trap link-status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
atm atm1483 subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
atm auto-configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
atm bulk-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
atm bulk-config modify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
atm bulk-config shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
atm cac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
atm cell-packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
atm-cell-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
atm classifier-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
atm class-vc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
atm clock internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
atm description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
atm dos-protection-group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
atm framing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
atm ilmi-enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
atm ilmi-keepalive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
atm lbo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
atm mcpt-timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
atm oam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
atm oam flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
atm oam loopback-location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
atm policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
atm policy-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
atm pvc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
atm shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
atm snmp trap link-status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
atm sonet stm-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
atm uni-version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
atm vc-per-vp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
atm vp-description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
atm-vp qos-parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
atm-vp qos-profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
atm vp-tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
authentication key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
authentication-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
authentication message-digest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Copyright © 2010, Juniper Networks, Inc.

xii

JunosE 11.2.x Command Reference Guide A to M

Summary of Contents for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010

Crestron CRESTRON-APP-SSTV Operations & Installation Manual preview
CRESTRON-APP-SSTV
Brand: Crestron Pages: 28
Novell LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007 Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007
Brand: Novell Pages: 280
Avaya INDeX Agent Assist Supervisor Manual preview
INDeX Agent Assist
Brand: Avaya Pages: 12
ASCOM DURAALARM - 1 Brochure preview
DURAALARM - 1
Brand: ASCOM Pages: 28
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
10ZiG Technology Limited RBT Series Configuration Manual preview
RBT Series
Brand: 10ZiG Technology Limited Pages: 125
MACROMEDIA CONTRIBUTE 3-DEPLOYING CONTRIBUTE Manual preview
CONTRIBUTE 3-DEPLOYING CONTRIBUTE
Brand: MACROMEDIA Pages: 38
Bacharach Fyrite User Software Installation Manual preview
Fyrite
Brand: Bacharach Pages: 12
NETGEAR 7200 Series Quick Installation Manual preview
7200 Series
Brand: NETGEAR Pages: 2
FARONICS DEEP FREEZE ENTERPRISE - UPDATE PROCEDURE... Update Manual preview
DEEP FREEZE ENTERPRISE - UPDATE PROCEDURE...
Brand: FARONICS Pages: 15
Xerox DocuPrint 100MX User Manual preview
DocuPrint 100MX
Brand: Xerox Pages: 74
Garmin eTrex Vista C Software Manual preview
eTrex Vista C
Brand: Garmin Pages: 4
Canon 9320A010 - EOS Rebel XSi Starter Instruction Manual preview
9320A010 - EOS Rebel XSi Starter
Brand: Canon Pages: 55
Garmin Nuvi 755T - Automotive GPS Receiver Owner'S Manual Supplement preview
Nuvi 755T - Automotive GPS Receiver
Brand: Garmin Pages: 61
TC Electronic NonLin2 Manual preview
NonLin2
Brand: TC Electronic Pages: 16
AVG IDENTITY PROTECTION User Manual preview
IDENTITY PROTECTION
Brand: AVG Pages: 27
Harrison MIXBUS V2.0.2 User Manual preview
MIXBUS V2.0.2
Brand: Harrison Pages: 85
TANDBERG TELEPRESENCE MANAGEMENT SUITE SECURE SERVER - CONFIGURATION GUIDE... Administration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER - CONFIGURATION GUIDE...
Brand: TANDBERG Pages: 37

Brands by name

Popular brands

Load more brands