Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1413 / 1502

mpls ldp targeted-hello send list
Syntax [ no ] mpls ldp targeted-hello send list
{ access-list
accessListName | ipAddress [ ipAddress ]* }
Release Information Command introduced before JunosE Release 7.1.0.
Description Configures the list of peer addresses to which MPLS sends targeted hello messages and
from which MPLS accepts targeted hello messages. The
no version removes the list of
peer addresses.
Options accessListName —String of up to 32 alphanumeric characters that identifies an access
list
•
•
ipAddress —IP address of a peer
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Global Configuration
1369 Copyright © 2010, Juniper Networks, Inc.
Chapter 13: M Commands