Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 53 / 1502

Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx
Models, and ERX310 Router
(continued)
Example Interface Specifier Description Interface Type
mplsL2shim 3/2.1 slot/port[.subinterface ]
• slot —Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
• port —Port number on the I/O module
• subinterface —Number of the subinterface
in the range 1–2147483647
MPLS shim
interface mplsL2shim
mplsMajor 3/2.1 slot/port[.subinterface ]
• slot —Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
•
port —Port number on the I/O module
• subinterface —Number of the subinterface
in the range 1–2147483647
MPLS major
interface mplsMajor
mplsMinor
lsp-02020202-1-4 [ vr :] tunnel-name
• vr —Name of a virtual router
• tunnel-name— Name of the tunnel
MPLS minor
interface mplsMinor
null 0 0 Null
interface,
which acts as
a data sink
and cannot
forward or
receive
traffic. You
cannot
configure
values on the
null interface. null
pos 3/2 slot / port [. subinterface ]
• slot —Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
•
port —Port number on the I/O module
• subinterface —Number of the subinterface
in the range 1–2147483647
Packet over
SONET
(POS)
interface pos
Refer to the individual formats listed below. CT3, E3
Frame, T3
Frame, or
cOCx/STMx
interface serial
9 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Command Reference Topics