Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 364 / 1502

bridge subscriber-policy
Syntax bridge { bridgeGroupName | vplsName } subscriber-policy subscriberPolicyName
no bridge { bridgeGroupName | vplsName } subscriber-policy
[ subscriberPolicyName ]
Release Information Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Description Associates the subscriber (client) interfaces that belong to a bridge group or to a VPLS
instance with a nondefault subscriber policy. The
no version removes the association
with the subscriber policy.
You cannot associate a nondefault subscriber policy with trunk (server) interfaces that
belong to a bridge group or to a VPLS instance. You also cannot associate a nondefault
subscriber policy with the VPLS virtual core interface, which acts as a trunk interface.
The VPLS virtual core interface represents all of the MPLS tunnels from the router to the
remote VPLS edge (VE) devices.
Options bridgeGroupName —Name of a bridge group specified with the bridge command
•
•
vplsName —Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
•
subscriberPolicyName —Name of the subscriber policy specified with the
subscriber-policy command
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 320
JunosE 11.2.x Command Reference Guide A to M