Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 104 / 1502

aaa timeout
Syntax To set the default idle timeout:
aaa timeout idle idleTimeout
no aaa timeout idle
To set the default session timeout:
aaa timeout session sessionTimeout
no aaa timeout session
To enable monitoring of only ingress traffic for the configured idle timeout period:
aaa timeout idle ingress-only
no aaa timeout idle [ ingress-only ]
Release Information Command introduced before JunosE Release 7.1.0.
ingress-only keyword added in JunosE Release 9.3.0.
Description Sets the default idle timeout or session timeout for B-RAS PPP users, and optionally
enables the PPP application to monitor only ingress traffic for the configured idle timeout
period to determine whether to disconnect an inactive PPP session. The
no version
restores the idle timeout or session timeout to its default value, 0 seconds, and disables
ingress-only traffic monitoring for idle timeout if configured. .
NOTE: To enable ingress-only traffic monitoring for the idle timeout period by issuing
the aaa timeout idle ingress-only command, you must also set the idle timeout value
by issuing the aaa timeout idle command.
Options idleTimeout —In seconds, 300–86400
•
•
sessionTimeout —Time in the range 60–31622400 seconds (that is, a minimum of 1
minute to a maximum of 366 days); the router terminates the user session once the
maximum session timeout is reached, which means that the duration of a PPP or an
L2TP user session cannot exceed 366 days
•
ingress-only—Enables PPP to monitor only ingress traffic for the configured idle timeout
period to determine whether to disconnect an inactive PPP session; if you do not specify
the
ingress-only keyword, PPP monitors both ingress traffic and egress traffic for the
idle timeout period to determine inactivity and subsequent disconnection of an inactive
PPP session
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 60
JunosE 11.2.x Command Reference Guide A to M