Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 954 / 1502

ip prefix-tree
Syntax ip prefix-tree treeName { description desc | { permit | deny } ipPrefix }
no ip prefix-tree treeName [ description | { permit | deny } ipPrefix ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Creates a prefix tree for best-match route filtering; specifies a tree entry—a deny or permit
clause for a network address. The
no version removes the specified prefix tree or the
specified tree entry.
Options
•
treeName —Name of the prefix list; a string of up to 32 characters
•
desc —Description of the prefix list
•
deny—If the prefix of the route being filtered matches the specified prefix and deny is
specified, the route is not redistributed
•
permit—If the prefix of the route being filtered matches the specified prefix and permit
is specified, the route is redistributed as controlled by the set actions
•
ipPrefix —Network route to be filtered, in the format network / length , where
•
network —Base address of the network route to be filtered; for example, 192.168.32.0
or 10.10.0.0
•
length —Length of the network prefix; number of bits masking base address to produce
address to be matched
Mode Router Configuration
Copyright © 2010, Juniper Networks, Inc. 910
JunosE 11.2.x Command Reference Guide A to M