Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 491 / 1502

configure
Syntax configure [ terminal | file [ fileName ] [ verbose | show-progress [ dotPeriod ] ] ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Enters Global Configuration mode. There is no no version.
NOTE: This command is not allowed for a short time after a warm restart (warm
switchover) occurs. This behavior allows some applications time to complete their
warm-restart initialization. However, if the warm-restart does not complete in 5 minutes,
the warm-start is cancelled and configuration access is restored.
Options
•
terminal—Enables manual configuration from a terminal
•
file—Configures the router from a script file
•
fileName —Script file to execute
•
verbose—Echoes each command as the script is executed
•
show-progress—Displays a ‘.’ during script execution
•
dotPeriod —Number of commands executed before a ‘.’ is displayed; default value is
100
Mode Privileged Exec
447 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: C Commands