Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1324 / 1502

match route-type
Syntax match route-type internal [ intra | inter ] [ level-1 | level-2 ]
[ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type external [ type-1 | type-2 ] [ level-1 | level-2 ]
[ internal [ intra | inter ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ internal [ intra | inter ] ]
[level-1 | level-2 ] [ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ external [ type-1 | type-2 ] ]
[ level-1 | level-2 ] [ internal [ intra | inter ] ] [ level-1 | level-2 ]*
no match route-type [ internal [ intra | inter ] | external [ type-1 | type-2 ] |
level-1 | level-2 ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Matches routes of the specified type. The no version removes the match clause from a
route map unless you specify a value, in which case only that value is removed from the
match clause.
Options internal—Specifies internal routes
•
•
intra — OSPF intra-area routes
•
inter — OSPF interarea routes
•
external—Specifies external routes
•
type-1—OSPF type 1 external routes
•
type-2—OSPF type 2 external routes
•
level-1—Specifies IS-IS level 1 routes
•
level-2—Specifies IS-IS level 2 routes
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Policy List Configuration, Route Map Configuration
Copyright © 2010, Juniper Networks, Inc. 1280
JunosE 11.2.x Command Reference Guide A to M