manualshive.com logo in svg

Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

The "Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010" is a comprehensive Command Reference Manual for managing your Juniper network devices. This manual provides detailed instructions on utilizing the XML Management Protocol. Download this free manual from manualshive.com to optimize your network management capabilities.

Share
Download
background image

authentication mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
authentication-none . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
authorization change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
auth-router-name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
auto-configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
auto-configure atm1483 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
auto-configure vlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
auto-cost reference-bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
automatic-virtual-link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
auto-summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
average-length-exponent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
avp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Chapter 3

B Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

backup-address-pool-name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
bandwidth oversubscription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
baseline aaa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
baseline aaa route-download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
baseline atm vp interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
baseline bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
baseline bridge interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
baseline bridge interface vpls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
baseline clns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
baseline cops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
baseline dhcp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
baseline frame-relay interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
baseline frame-relay multilinkinterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
baseline hdlc interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
baseline interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
baseline ip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
baseline ip bgp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
baseline ip dhcp-external . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
baseline ip dhcp-local . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
baseline ip dvmrp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
baseline ip http . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
baseline ip igmp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
baseline ip igmp-proxy interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
baseline ip interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
baseline ip mobile home-agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
baseline ip nat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
baseline ip ospf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
baseline ip rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
baseline ip tunnel-reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
baseline ip udp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
baseline ip vrrp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
baseline ipv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

xiii

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010

CSSN ScanShell 3000 User Manual preview
ScanShell 3000
Brand: CSSN Pages: 8
Partec ParaStation5 Administrator'S Manual preview
ParaStation5
Brand: Partec Pages: 98
Sun Microsystems 2005Q2 Quick Start Manual preview
2005Q2
Brand: Sun Microsystems Pages: 38
M-Audio Electric Bass Vol. 1—Rock Quick Start Manual preview
Electric Bass Vol. 1—Rock
Brand: M-Audio Pages: 4
Allied Telesis 86222-27 Release Note preview
86222-27
Brand: Allied Telesis Pages: 46
NETGEAR 7200 Series User Manual preview
7200 Series
Brand: NETGEAR Pages: 282
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Brand: Novell Pages: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Brand: Novell Pages: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Brand: Novell Pages: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Brand: Novell Pages: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Brand: Novell Pages: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Brand: Novell Pages: 7
Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual preview
LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS
Brand: Novell Pages: 93
Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual preview
OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX
Brand: Novell Pages: 254
Novell LINUX ENTERPRISE DESKTOP 10 Quick Manual preview
LINUX ENTERPRISE DESKTOP 10
Brand: Novell Pages: 9
Novell IFOLDER 3.6 - SECURITY ADMINISTRATION Manual preview
IFOLDER 3.6 - SECURITY ADMINISTRATION
Brand: Novell Pages: 22
Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual preview
LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009
Brand: Novell Pages: 236
Novell GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION Manual preview
GROUPWISE 7 - MULTI-SYSTEM ADMINISTRATION
Brand: Novell Pages: 75

Brands by name

Popular brands

Load more brands