Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 529 / 1502

•
warning or 4—Warning condition
•
notice or 5—Normal but significant condition
•
info or 6—Informational message
•
debug or 7—Debug message
•
verbosityLevel —Verbosity of the log category's messages; can be any of the following:
•
low—Terse
•
medium—Moderate detail
•
high—Verbose
•
switchState —Switches from one type of tree to another
•
rpt-switch—Switch from a shortest-path tree to a shared path tree
•
spt-switch—Switch from a shared-path tree to a shortest path tree
•
groupAddress —IP address of the multicast group
•
sourceAddress —IP address of the multicast source
•
on—Turns on the specified PIM mode on all virtual routers
•
off—Turns off the specified PIM mode on all virtual routers
•
sg-state—Displays information about the relationship between a source, multicast
group, and RP router
•
rp—Displays information about the relationships between sources, groups, and the
specified RP router
•
rpAddress —Address of the RP router
•
count—Displays one of the following
•
(with no optional keywords) number of relationships between a source, multicast
group, and RP router
•
(with the group keyword) number of sources associated with the multicast group
for PIM sparse mode
•
(with the source and group keywords) number of source-group pairs for PIM sparse
mode
•
(with the rp keyword) number of source-group pairs associated with the RP router
for PIM sparse mode
Mode Privileged Exec
485 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: D Commands