Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 597 / 1502

enable
Syntax To access Privileged Exec mode:
enable [ level ]
To enable event or trigger configuration:
[ no ] enable
Release Information Command introduced before JunosE Release 7.1.0.
Description From User Exec mode, enters Privileged Exec mode at the specified privilege level. There
is no
no version for this use.
From SNMP Event Configuration or SNMP Trigger Configuration modes, enables the
configuration for the event or trigger, respectively. The
no version disables the event or
trigger.
Options level— level at which you want to access the Privilege Exec mode; default value is 10;
commands generally fall into one of the following security/privilege levels:
•
•
0—allows the user to execute the help , enable , disable , and exit commands
•
1—Allows the user to execute commands in User Exec mode plus commands at level
0
•
5—Allows the user to execute Privileged Exec show commands plus the commands
at levels 1 and 0
•
10—Allows the user to execute all commands except support commands, which
may be provided by Juniper Networks Customer Service, or the ability to assign
privileges to commands
•
15—Allows the user to execute support commands and assign privileges to commands
Mode SNMP Event Configuration, SNMP Trigger Configuration, User Exec
553 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: E Commands