Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

Page: 1277 / 1502

•
warning or 4—Warning condition
•
notice or 5—Normal but significant condition
•
info or 6—Informational message
•
debug or 7—Debug message
•
off—Disables logging to this destination
•
include—Sends only the specified event categories to the system log server
•
exclude—Sends all event categories except those specified to the system log server
Issuing an include command after an exclude command (or vice versa) overrides the
earlier command.
You can issue successive include commands or successive exclude commands.
Successive commands expand the list of included or excluded categories.
•
category —Log category; refer to the CLI online Help for available options
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Global Configuration
1233 Copyright © 2010, Juniper Networks, Inc.
Chapter 12: L Commands