manualshive.com logo in svg

Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Command Reference Manual

The "Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010" is a comprehensive Command Reference Manual for managing your Juniper network devices. This manual provides detailed instructions on utilizing the XML Management Protocol. Download this free manual from manualshive.com to optimize your network management capabilities.

Share
Download
background image

C

Cisco HDLC commands

baseline hdlc interface...............................................225
encapsulation hdlc.....................................................562
hdlc down-when-looped..........................................677
hdlc keepalive...............................................................678
hdlc shutdown..............................................................679

CLI commands.

See

user interface commands

CLNS commands

clns configuration-time............................................429
clns holding-time........................................................430
clns host...........................................................................431

COCX-F3 commands

interface serial...............................................................725

cOCx/STMx commands

baseline path interface sonet.................................258
baseline section interface sonet...........................264
controller sonet............................................................457
crc......................................................................................467
interface serial...............................................................725
loopback.......................................................................1246
mru...................................................................................1427
mtu..................................................................................1429

cOCx/STMx commands and OCx/STMx commands

description.....................................................................505

conventions

notice icons.......................................................................xli
text and syntax...............................................................xlii

CT3 commands

bert.....................................................................................271
crc......................................................................................467
description.....................................................................505
equipment loopback..................................................573
idle-character...............................................................692
invert data.......................................................................728
loopback.......................................................................1246
mdl carrier.....................................................................1292
mdl string......................................................................1293
mdl transmit................................................................1294
mru...................................................................................1427
mtu..................................................................................1429

customer support..................................................................xliii

contacting JTAC.............................................................xliii

D

default commands vs. no commands...............................3
deprecated commands..........................................................4

DHCP commands

clear ip dhcp-local binding.......................................381
ip dhcp-capture...........................................................756
ip dhcp-local auth domain.......................................762
ip dhcp-local auth include.......................................763
ip dhcp-local auth password..................................764
ip dhcp-local auth user-prefix................................765

DHCP external server commands

dhcp-external duplicate-mac-address...............510
ip dhcp-external recreate-subscriber

interface......................................................................759

DHCP local server commands

ip dhcp-local

auto-configureagent-circuit-identifier...........766

ip dhcp-local cable-modem....................................767
ip dhcp-local snmp Traps..........................................771
link....................................................................................1216

DHCPv6 local server commands

ipv6 dhcpv6-local delegated-prefix...................1015
ipv6 dhcpv6-local dns-domain-search............1016
ipv6 dhcpv6-local dns-server................................1017
ipv6 dhcpv6-local prefix-lifetime........................1018

Diagnostic commands

diag.....................................................................................512
diag-level.........................................................................513

digital certificate commands

common-name...........................................................446
country............................................................................466
crl......................................................................................468
domain-name..............................................................539
enrollment retry-limit................................................570
enrollment retry-period..............................................571
enrollment url................................................................572
ike crl................................................................................696
ipsec ca authenticate................................................984
ipsec ca enroll..............................................................985
ipsec ca identity..........................................................986
ipsec certificate-database refresh........................987
ipsec certificate-request generate.......................988
ipsec crl .........................................................................990
ipsec identity..................................................................991
ipsec key generate .....................................................994
ipsec key pubkey-chain rsa.....................................996
ipsec key zeroize..........................................................997
issuer-identifier............................................................1132
key-string.......................................................................1139

Copyright © 2010, Juniper Networks, Inc.

1440

JunosE 11.2.x Command Reference Guide A to M

Summary of Contents for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010

Waves Linear-Phase MultiBand Software Audio Processor User Manual preview
Linear-Phase MultiBand Software Audio Processor
Brand: Waves Pages: 27
Red Hat NETWORK ENTERPRISE - USER 2.2 User Reference Manual preview
NETWORK ENTERPRISE - USER 2.2
Brand: Red Hat Pages: 104
F-SECURE ANTI-VIRUS LINUX CLIENT SECURITY - Administrator'S Manual preview
ANTI-VIRUS LINUX CLIENT SECURITY -
Brand: F-SECURE Pages: 208
National Instruments PID Control Toolkit 371685C-01 User Manual preview
PID Control Toolkit 371685C-01
Brand: National Instruments Pages: 39
GE eKEY User Manual preview
eKEY
Brand: GE Pages: 82
MACROMEDIA FLEX Reference preview
FLEX
Brand: MACROMEDIA Pages: 830
Broadcom Bluetooth for Microsoft Windows User Manual preview
Bluetooth for Microsoft Windows
Brand: Broadcom Pages: 30
Steinberg TOOLS for CMC Installation Manual preview
TOOLS for CMC
Brand: Steinberg Pages: 1
Garmin GPSMAP GPSMAP 196 Specifications preview
GPSMAP GPSMAP 196
Brand: Garmin Pages: 2
Garmin MapSource User Manual preview
MapSource
Brand: Garmin Pages: 32
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Brand: Red Hat Pages: 73
Promise Technology FastTrak SX Series Version 4.4 User Manual preview
FastTrak SX Series Version 4.4
Brand: Promise Technology Pages: 102
Pfaff CREATIVE 4D Brochure preview
CREATIVE 4D
Brand: Pfaff Pages: 8
3Com H3C IMC STANDARD PLATFORM - Installation Manual preview
H3C IMC STANDARD PLATFORM -
Brand: 3Com Pages: 68
TomTom Navigation app for iPhone/iPad Reference Manual preview
Navigation app for iPhone/iPad
Brand: TomTom Pages: 84
Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Getting Started preview
225A1-05A111-1001 - AutoCAD Electrical 2009
Brand: Autodesk Pages: 255
Red Hat ENTERPRISE LINUX AS 2.1 - Installation Manual preview
ENTERPRISE LINUX AS 2.1 -
Brand: Red Hat Pages: 210
Red Hat ENTERPRISE LINUX 5.3 - RELEASE MANIFEST Release Note preview
ENTERPRISE LINUX 5.3 - RELEASE MANIFEST
Brand: Red Hat Pages: 240

Brands by name

Popular brands

Load more brands